Pagina 7 of 12
1-11-2016
LoRaWAN mini gateway
#ADDR[Address]
[Address] = The address of the node in 8 ASCII characters.
The reply of the gateway will be:
*ADDR [Address]
[Address] = The address that is set.
To request the current transmit address that is set use this command:
?ADDR
The reply will be:
=ADDR [Address]
[Address] = The address that is set.
8.2 DRDW – Datarate down
This command is used for the datarate that is used on the down channel of the LoRaWAN
communication, see Figure 1.
To set the datarate use:
#DRDW[Datarate]
The [Datarate] can have the following values
Value
Description
00
SF 12 BW 125 kHz
01
SF 11 BW 125 kHz
02
SF10 BW 125 kHz
03
SF9 BW 125 kHz
04
SF8 BW 125 kHz
05
SF7 BW 125 kHz
06
SF7 BW 250 kHz
Table 6: Datarate values
The reply will be:
*DRDW [Datarate Description]
To request the current datarate use:
?DRDW
The reply will be:
=DRDW [Datarate Description]
