Pagina 9 of 12
1-11-2016
LoRaWAN mini gateway
=CHDW [Channel Description]
8.5 CHUP – Channel up
This command is used for the channel that is used on the up channel of the LoRaWAN
communication, see Figure 1.
To set the channel use:
#CHUP[Channel]
The [Channel] can have the values listed in Table 7.
The reply will be:
*CHUP [Channel Description]
To request the current channel use:
?CHUP
The reply will be:
=CHUP [Channel Description]
8.6 APPK – Application key
With this command the application key for the de- and encryption of the payload is set. To set the
application key use:
#APPK[Key]
The [Key] consists of 32 ASCII characters representing 16 bytes in hexadecimal notation.
The reply will be:
*APPK[Key]
To request the current key use:
?APPK
The reply will be:
=APPK[Key]
8.7 NWKK – Network key
With this command the network key for the calculation of the MIC. To set the network key use:
#NWKK[Key]
The [Key] consists of 32 ASCII characters representing 16 bytes in hexadecimal notation.
The reply will be:
