background image

 

 

Proprietary Notice 

This document contains confidential information proprietary to IDENTEC SOLUTIONS and may not be used or 
disclosed to other parties in whole or in part without the prior written authorization from IDENTEC 
SOLUTIONS. 
 

Disclaimer and Limitation of Liability 

IDENTEC SOLUTIONS AG and its affiliates, subsidiaries, officers, directors, employees and agents do not make 
any express or implied warranties or representations with respect to such information including, without 
limitation, warranties as to non-infringement, reliability, suitability for a particular purpose and accuracy. 
IDENTEC SOLUTIONS shall not under any circumstances be liable to any person for any special, incidental, 
indirect or consequential damages, including without limitation, damages resulting from use of or reliance on 
information presented herein, or loss of profits or revenues or costs of replacement goods, even if informed in 
advance of the possibility of such damages. 
 
Customer shall be solely responsible for proper selection, application, and use of Products, as well as the 
incorporation/integration of Products into other equipment or systems.  Customer shall indemnify and hold 
IDENTEC SOLUTIONS harmless from and against any and all damages, liabilities, claims, or expenses 
(including reasonable attorneys' fees) arising out of or relating to (i) improper selection, application, 
installation, use or incorporation/integration of Products; or (ii) infringement of any patent, trademark, 
copyright or other third party interest arising out of IDENTEC SOLUTIONS' compliance with any of Customer's 
designs, specifications, or instructions. 
 

Trademarks 

“IDENTEC SOLUTIONS”,  “Intelligent Long Range”, “ILR” and the stylized “i” are registered trademarks and “i-
CARD”, “i-PORT”, “i-LINKS”, “Visibility Delivered.” are trademarks of IDENTEC SOLUTIONS, Inc. and/or 
IDENTEC SOLUTIONS AG. 
 

Copyright Notice 

Copyright © 2014 IDENTEC SOLUTIONS. All rights reserved. 
No part of this document may be reproduced or transmitted in any form by any means, photographic, 
electronic, mechanical or otherwise, or used in any information storage and retrieval system, without the prior 
written permission of IDENTEC SOLUTIONS. 
 

Issue 1.0 / May 12, 2014. Subject to alteration without prior notice. Printed in Austria 
 

 

 

 

  

  

  

  

 

EUROPE  

HEAD OFFICE 

USA 

GERMANY 

NORWAY 

AUSTRALIA 

 

+43 5577 87387-0 

IDENTEC SOLUTIONS AG 

IDENTEC SOLUTIONS, INC. 

IDENTEC SOLUTIONS  

IDENTEC SOLUTIONS AS 

IDENTEC SOLUTIONS   

 

sales@identecsolutions.com 

Millennium Park 2 

Preston Plaza 

DEUTSCHLAND GMBH 

Kartheia 3 

AUSTRALIA AND  

 

  

6890 Lustenau 

17950 Preston Rd., Suite 200  

AURUM 05 / Ost  

4626 Kristiansand 

NEW ZEALAND P/L  

 

NORTH AMERICA 

Austria 

Dallas, Texas 75252 

Goldbeckstraße 5 

Norway 

Riverview Business Park 72  

 

+1 866 402-4211 

Tel  +43 5577 87387-0 

USA 

69493 Hirschberg 

Tel  +47 38 00 35 30 

Maribyrnong St, Footscray VIC 

 

sales@identecsolutions.com 

Fax +43 5577 87387-15 

Tel   +1 972 535 4439 

Germany 

Fax +47 38 00 35 31 

3011 Australia  

 

  

  

Fax  +1 469 424 0404 

Tel   +49 6201 99 57-0 

  

Tel   +61 3 9396 8900 

 

  

  

  

Fax  +49 6201 99 57-99 

  

Fax  +61 3 9689 2493 

 

Summary of Contents for SensorSMART i-Q350LX PCE


























Reviews: