Version Mai 2023
6
To assemble the seat:
1. Open the armrests so that they face away from the backrest.
2. Lift the seat frame up and insert it into the plastic connectors halfway up the arm frames - you will hear it "click" into place.
3. Press the seat down to connect it to the seat frame - you will hear a click into place. Make sure the seat is secure before using
it.
USE
1. Lift up the lever located underneath the right hand side of the seat, and swivel
the seat. Release the lever and keep swivelling the seat until it locks in position.
2. Position the seat so it is facing the user
3. The user should safely sit on the seat in the position above. The swivel lever can then be operated to allow the seat to be
positioned in the bath (as shown). The user can now bathe.
4. After the user has bathed, the chair can be swivelled to the facing position for safe exit from the bath.
CARE AND MAINTENANCE
Failure to care for and monitor your product may result in the risk of serious injury.
•
Wipe the swivel bath seat or shower and dry it after each use.
•
Periodically, clean the bath seat with a damp cloth and mild detergent or disinfectant. For example, a mild chloride disinfec-
tant (solution of 1000 parts per million) can be used.
•
The bath seat can also be cleaned in an aqueous system (for example a Turbex machine) up to 80ºC.
•
Check that the bath seat swivels easily, smoothly and locks in to place. If the locking mechanism does not feel positive or
there is excessive movement in the device, remove from use and contact your dealer.
•
Check for cracks and damage to the bather, in particular the plastic seat and tubing.
•
Do not use in environments over 60ºC (saunas, for example).
•
If there is a malfunction, do not repair the product yourself. Consult an authorized dealer.
•
Checklist :
To keep the product in good condition, check before each use, and check regularly as follows:
Check the article
Anytime
Weekly
Check the operation of the spring loaded knob to allow 90° rotation of
the product
X
Checking the condition of the seat
X
Check the function and condition of the armrests
X
Check that the brackets are fully attached to the edges of the bathtub
X
CHANGE OF OWNERSHIP
The product can be reused. It must first be cleaned and disinfected in accordance with hygiene instructions. When transferring
the product, remember to hand over all the necessary technical documents to the new user. Beforehand, the product must be
inspected by an authorised specialist.
