DMI-F-12_Annexe 2_Notice.5
Page
8
/
13
V1-21/12/2022
ADJUSTMENT OF THE HANDLES HEIGHT :
Note: Do not remove the inner tube from the outer tube when adjusting the handle height.
•
To ensure the rollator is at the correct height, stand behind the rollator with your arms at your sides. Then adjust the
handle height to the height of the user's wrists.
WALK WITH THE ROLLATOR
:
•
When using the rollator, stand up straight behind it and do not bend your back.
•
Adjust the height of the handles if the position of use is not correct.
FOLD THE ROLLATOR :
a.
Remove the plastic seat
b.
Unlock the seat support, which is
fixed to the rollator’s frame
c.
Bring back the front wheels against the rear wheels.
The 2 wheels Modulo rollator is designed to stand alone when folded.
CLEANING - MAINTENANCE
Failure to service and maintain your product can result in the risk of serious injury.
•
- Clean the rollator regularly with warm water and a soft cloth. Do not use abrasives, detergents or solvents.
•
- Dry with a clean, dry soft cloth.
•
- Ensure that there is no build-up of dirt or debris around the axle, brakes or wheels.
•
- Do not use cleaning products containing phenol or chlorine as this may damage aluminium and polyamide materials.
•
- Lubricate the wheels with a little oil if they squeak.
•
- Periodically check all screws and bolts for wear and strength. Replace all broken, damaged or worn parts immediately.
•
- Check that the brakes work before each use.
•
- Check the parking brakes by pushing the handles into the locked position and then attempting to push the rollator.
•
- If a malfunction occurs, do not repair the rollator yourself. Consult an authorised dealer.
•
Checklist :
To keep the rollator in good condition, check before each use, and check regularly as follows
Check the item
Anytime
Weekly
Monthly
Yearly
Clip and knob for height adjustment
X
Structural weld at wheels
X
Cleanliness
X
Screws and fasteners
X
Stability of frame and backrest
X
Condition of seat
X
Condition of the wheels and pads
X
