identités ID MOUV, Safety Manual

- 8 - 

  3-2 

 
IV

、

Using Introduction

1

、

Electric Wheelchair Operation

（

1

）

After the operator is seated, turn on the power switch of the controller, and after the 

prompt is given, the wheelchair is turned on,The LCD shows the current power and remaining 
mileage. The system sets the safe start strategy. Please release the joystick when starting up. 
Otherwise, the system will be faulty and cannot be turned on;

（

2

）

The speed of the wheelchair is adjusted by the speed adjustment button on the controller. There 

are five grades. It is better to use low speed when starting,Real-time speed can be displayed while 
driving, and the grade cannot be changed while driving; The first time users recommend driving at a 
low speed to avoid accidents due to unskilled operation.

（

3

）

Pull the handle to start slowly, the joystick handle forwards the wheelchair forward,The 

joystick handle turns left to the left wheelchair, the joystick handle turns right to the right 
wheelchair, and to backwards the wheelchair retreats. After the simple understand, the wheelchair 
can be driven freely; 

（

4

）

If you need a whistle alarm, press the button marked with the horn symbol on the controller; 

（

5

）

The battery is fully charged and displays 5 grids. When the battery is low, the grid is zero or 

the battery icon is blinking.It is recommended that when the remaining battery power is insufficient, 
please charge it in time to keep the battery fully charged;

（

6

）

Press the power switch for a long time, and turn off the wheelchair after a prompt.

 
2

、

Controller Function Description 

●

Joystick: figure 1 as above, joystick can control the direction and speed of the wheelchair; 

●

Power Switch: figure 5 as above, when turned on, the power is turned on after the “drop” sounds; 

1-

 Joystick

2-

Speed limited reduction 

3-

 Speed limited plus

4-

 Grade

5-

 Power switch

6-

 Speaker

7-

 Power capacity

1 

2 

3 

4 

5 

6 

7