CLOUD
47
X
0
F
R
EFERENCE
M
ANUAL
30
Example:
1)
To issue the “READER_GETIFDTYPE (0x12)” escape command , this pseudo APDU
would be used:
Command APDU
:
FF CC 00 00 01 12
Response
:
20 57 90 00
2)
To issue the “READER_SETMODE (0X01)” escape command, this pseudo APDU
would be used:
Command APDU
:
FF CC 00 00 02 01 01 (to set to EMV mode)
Response APDU
:
90 00
Note:
1) To send Escape commands using this method, the reader should be connected in
shared mode using T0 or T1 protocol. Only then would the resource manager allow
SCardTransmit.
2)
As the escape commands defined using “
READER_GENERIC_ESCAPE
” have ISO
7816 APDU format, they can be sent using SCardTransmit without having any need to
prepend “FF CC 00 00 P3”.
