iDevices SWITCH, User Manual

6

Light Bar Color Codes

MODE

DESCRIPTION

Pairing Mode

The accessory is waiting for the handset to configure the accessory’s 

Wi-Fi

®

. The LEDs 

flash blue.

Pairing

The accessory is waiting for the handset to initiate and complete pair 

set up through either Wi-Fi

®

 or BLE (Bluetooth Low Energy). 

The LEDs 

are solid blue.

Pairing Expired

Pairing mode has expired and the accessory is waiting for the user to 

press the button for about 3 seconds to reenter pairing mode. 

The 

LEDs slow flash blue.

Pairing Restart 

To reinitiate the pairing mode, hold the button down for 3 seconds 

and the LEDs will 

rapidly flash blue.

Wi-Fi

®

 Link Up

When the accessory joins a Wi-Fi

®

 network, (i.e., the link is up) the 

LEDs 

rapidly flash green for a second.

Wi-Fi

®

 Link Down

When the accessory has lost the connection to the Wi-Fi

®

 network, 

(i.e., the link is down) the LEDs 

slow flash orange until the link is up. 

Lockout

When the accessory has detected 100 failed pair set up attempts, it 

enters lockout mode. The LEDs 

slow flash red until the accessory is 

factory reset.

Factory Reset 

Hard Factory Reset  

*Should be used as a last 

resort. This will bring the 

switch back to the original 

firmware. It will need to be 

updated after pairing

To initiate a soft factory reset, which will clear all WiFi and pairing 

information, hold the button down for 10 seconds until the LEDs 

rapidly flash red.

 When the button is released the unit will reboot and 

reenter the pairing mode. 

To initiate a hard factory reset, which will clear all WiFi and pairing 

information as well as revert the unit firmware back to the original 

factory firmware, hold the button in while simultaneously plugging the 

unit into the wall. Continue to hold the button until the LEDs 

rapidly 

flash red.

 Release the button and the unit will reboot and reenter 

pairing mode.

Identify

When the accessory receives a request to identify itself, it 

rapidly 

flashes purple.

Rating Information

UL Rated to UL STD 244A & STD 498A