5
with your camera, instead of entering it manually.
• The app will now walk you through setting up your iDevices Switch.
• Once set up, you will be able to quickly control the product within
the app, or using Siri
®
. To learn about all the additional features,
check out the
iDevices Connected app manual for HomeKit
.
Using The Product
• Once the Switch is set up, you can control the color of the LED light
from the Connected app, or choose to turn the LED light off.
• Clicking the button on the side of the unit will manually turn the
Switch
on
or
off.
Problem Solving
The following information covers some of the most common
troubleshooting issues with the iDevices
®
Switch. If you’d like more detail
about your Switch and its capabilities, please visit our support site at
idevicesinc.com/support, or give us a call Monday-Friday from 8am-8pm
EST.
What do I do if an unexpected error occurs during initial setup?
First, try quitting the app by double clicking the home button and sliding
the app upwards. Unplug the Switch from the outlet and plug it back in.
If the LEDs flash green, reopen the app and proceed with the on-screen
instructions. If the LEDs do not flash green, perform a factory reset.
Factory Reset
To reset the Switch to its factory condition, hold down the button for 10
seconds or more, the unit will momentarily flash red, white and then restart
the setup sequence with a fast blue blink.
I’m experiencing issues with the iDevices
®
Connected app.
The iDevices
®
Connected app requires iOS 8.1 or greater.
I don’t have a device to pair to my Switch, can I still use it?
You will have the ability to manually turn the Switch on and off using the
button located on the side if no device is present.
Summary of Contents for SWITCH
Page 1: ...User Manual ...
