FD151 Gas Compressor 23
Following a few simple procedures will greatly
minimize the risk of the unit becoming corroded
and damaged. Corken recommends the following
precautions to protect the compressor during
storage:
1. Drain the crankcase oil and refill with rust-
inhibiting oil.
2. Operate for a few minutes while fogging oil into
the compressor suction.
3. Relieve V-belt tension.
4. Plug all openings to prevent entry of insects and
moisture. (The cylinders may also be protected
with a vapor phase inhibitor, silica gel, or dry
nitrogen gas. If silica gel is used, hang a tag on
the unit indicating that it must be removed
before a start-up.)
5. Store in a dry area, off the ground if possible.
6. Rotate the flywheel every two weeks if possible.
CHAPTER SIX
EXTENDED STORAGE PROCEDURES
