Operator Manual
Aspect 100-4T and ISR
L100-2843 Rev. E
13
•
When the table is not connected to AC power, the table will automatically switch to
backup battery mode. The table should only be used under backup battery power
temporarily for necessary function if the external power supply is lost.
•
It is recommended that AC power be applied for a minimum of 8 hours every day to
keep a proper charge on the batteries and achieve maximum battery life. Batteries
are constantly being charged during normal use when connected to AC power.
When the table is not in use and not connected to AC power, the
Emergency Stop Pushbutton must be fully engaged to prevent the
batteries from being discharged and to safely power off the equipment.
•
This equipment’s tabletop braking systems utilize a passive magnetic brake; it remains
engaged/energized in the event of a complete loss of electrical power. Power is
necessary to release the brakes.
•
As the braking system utilizes permanent magnetic brakes, braking force is limited by
the magnet strength. Use caution when applying pressure to the side of the table as the
brakes can be overcome if more than 50 pounds (22.8 kg) of force is applied.
