3
Charging, installing and removing the battery
Charging the battery
Only use the supplied charger to charge the battery. Only use the battery supplied
with the Idiag P100.
Procedure
Open the Idiag P100 and install the battery
1
, as shown below, with the contacts
facing the top. Before closing, carefully check that the battery
1
is installed in the
correct position.
Remove the battery
1
from the detachable module
2
if the device will not be used for
a longer period (several days or weeks).
Install / remove Assemble housing Fit mouthpiece
Warnings
• The battery contains corrosive fluid. Should it leak, avoid contact with
the skin, eyes and mouth. Rinse affected skin areas with water for
around 15 minutes and seek medical attention. Do not inhale vapours or
smoke.
Instructional videos
www.idiag.ch/idiag-p100-training
you will also find instructional videos
which will help ease you into training.
