Installation, Support, and Maintenance Guide
73
Evolution
X1 Satellite Router
Appendix
E X1 Reset
The X1
Router has two types of reset functions: Level 0 and Level 1. Each type has a different
effect on the router. Contact the iDirect TAC center for more information.
E.1 Level 0 Reset
Level 0 reset provides a basic reset function.
Level 0 reset features:
•
Initiated by:
•
Router powering up
•
Briefly pressing the reset button and not keeping it pressed for more than 1
second, see
X1 Router (Indoor) Rear Interface Connectors
for the reset button locations
•
In Web iSite select the File Management menu > Restart Device > Restart
•
Used to boot to a newly-loaded software image and configuration
•
Recovery: recover by briefly pressing the reset button again, for not more than 1 second,
or cycle the power off, then on
E.2 Level 1 Reset
Level 1 reset provides a means of returning the router to factory default settings.
Level 1 reset features:
•
Initiated by:
•
Pressing the reset button and keeping it pressed for more than 8 seconds, see
X1 Router (Indoor) Rear Interface Connectors
for the reset
button location
CAUTION:
Level 0 reset can be triggered in 3 ways: by powering up the X1
Router;
briefly pressing the reset button; or, in Web iSite: selecting File Management >
Restart Device > Restart.
CAUTION:
This reset must not be used unless there is an intent to reconfigure or
reload the software and options. There is no recovery once this reset occurs. New
options file, software, and configuration must be loaded with Web iSite once this
reset has been initiated.
Summary of Contents for Evolution X1
Page 4: ...iv Installation Support and Maintenance Guide Evolution X1 Satellite Router Revision History ...
Page 89: ......
Page 90: ......
