Part 2 - Configuration
33
Record Setup
Refer to the
for basic
information on using the Setup menus.
General
Configure general recording settings.
•
Recycle
: When the recording disks become full, the
system overwrites existing data with new data, starting
with the oldest first. If
Recycle
is disabled, recording
will simply stop when the recording disks reach their
maximum capacity.
•
Event Record Dwell
: If linked recording is designated
as an event-triggered action, recording takes place for
the duration specified under this setting.
•
Record Audio
: The camera will record audio along
with video.
•
Auto Deletion
: Configure this option to delete
recording data automatically after the specified
number of days has elapsed. Select between 1 day and
999 days.
To disable Auto Deletion, select
Never
. If enabled,
recording data will be stored on the DVR for
the specified number of days and then deleted
automatically. Expired recording data are deleted
automatically at midnight and will be deleted even if
the system reboots or the
Auto Deletion
setting has
been changed.
•
Limit Time-Lapse Recording
: You can store event
recording data for longer. If you do not wish to use
Limit Time-Lapse Recording
, select
Never
. This
function is activated when data has been stored for
longer than as configured because the recording
disk has sufficient capacity and saves new data by
overwriting
Time Lapse Recording
data that are older
than as specified under Recycle mode.
•
If the recording stored on the disk is shorter than
the duration specified under
Limit Time-Lapse
Recording
, the older of
Event Recording
or
Time
Recording
data is deleted first.
•
The system's recording time may change depending
on recording quality, resolution, motion, and other
configurations made by the user. The duration
specified under
Limit Time-Lapse Recording
may
not be guaranteed in certain situations.
