Part 2 - Configuration
59
Main Monitor
Configure monitor-related settings.
•
Mode:
Select between
Full Sequence
and
Cameo
Sequence
. In the full sequence mode, the DVR
sequences through the cameras and displays them full
screen. In the cameo sequence mode, the bottom right
window in a multi-screen format sequences through
the cameras.
•
Interval
: Select between 1 secs and 1 mins. For more
information on Sequence, refer to the
•
Event Monitoring On
: With Event Monitoring
enabled, video feed from the camera configured to
start recording when an event occurs is shown on the
screen. For more information on Event Monitoring,
refer to the
.
•
Resolution
: Select 1920 x 1080, 1440 x 900, 1280 x
1024.
•
Supported resolutions may be restricted depending
on the monitor.
•
We recommend that you use 1920 x 1080
resolution.
Spot Monitor
Configure spot monitor-related settings.
Connect the Spot monitor using the BNC cable. Select
the box in the
Channels
column.
You can define which cameras display sequentially on
the Spot Monitor when in the single-screen display
format. Selecting the box under the
Camera
toggles
between On and Off. You can adjust the display dwell
time by selecting the box under the
Dwell
. You can
select dwell intervals ranging from 1 to 20 seconds.
Monitoring and playing back video from network
devices is not supported on the SPOT monitor.
