Part 1 - Getting Started
14
Zoom
Press the
ZOOM
button on the remote control and select
a channel you wish to zoom in on. A zoom frame will
appear on the selected channel. Use the arrow buttons
to position the frame. Press the
Play/Pause
button
to cycle through various zoom factors. When Zoom is
activated,
icon is on the status bar located on the
bottom of the system.
•
In Full Screen mode, activating Zoom automatically
selects the current channel.
•
To restore the channel to normal size, press the
Zoom button again.
PTZ Control
While in Live mode, right-click and select PTZ from the
context menu or press the
PTZ
button on the DVR’s
front panel or remote control to display the PTZ camera
selection window.
Select the camera you wish to control. The
icon will
begin to flash on the selected camera’s OSD window.
Use the
Arrow
buttons to pan and tilt the camera up,
down, left, and right.
Use the
and
buttons to zoom out/in.
Use the
and
buttons to shift focus from nearby to
far and vice versa.
Use the
button to load the preset window.
Use the
button to save current position as a preset.
You can also change the direction by dragging on the
mouse.
Also, it’s possible to use the mouse wheel to zoom in/out.
•
Logging in with an account that has
PTZ Control
Authority
is necessary in order to control PTZ
cameras.
•
A message will prompt if there is no PTZ camera
displayed on the Live screen.
•
Zoom in/out and shift focus using the
PTZ
Control
(
ZOOM
,
FOCUS
) buttons on the remote control.
•
To exit PTZ mode, press the
PTZ
button again.
