background image

Part 1 - Remote Setup

11

Network

Change the network settings, enable FEN and security 
features, and control network bandwidth use.

IP Address

IPv4

 •

Type

: Select the type of network you are using. If this 

option has been changed,

 

click 

Save

 to apply the 

current settings, and then restart Remote Setup. If you 
do not restart Remote Setup, the changes afterwards 
will not be applied.

 -

Manual

: Select if using a static IP. You will then be 

able to configure the related settings manually.

 -

DHCP

: Select if connected to the network using 

DHCP. Click 

Save

 to retrieve IP address and other 

network settings automatically from the DHCP 
server.

 •

DNS Server

: Enter the DNS server’s IP address. By 

using the DNS server, you will be able to use domain 
names instead of IP addresses when configuring the 
FEN, time, or SMTP server. If the camera is connected 
to the network via DHCP, select the 

From DHCP

 

option to retrieve the DNS server’s IP address from the 
DHCP server automatically. The updated address will 
be displayed upon the subsequent connection.

 •

RTP Multicast

: Set up the IP address, the Port, and 

TTL for the RTP multicast.

 

Link-local only: 

Use only the IP address of link-local 

IPv4. (ex 169.254.x.x)

Summary of Contents for DC-D4512WERA




















































Reviews: