background image

Part 1 - Remote Setup

39

Line Crossing

Select

 Line Crossing

 and configure line crossing 

settings. With line crossing event enabled, an event 
is considered when the set object in the set line and 
direction passes

.

 •

Line

: Click 

Setup

 and define the line and the 

conditions for which each line crossing event will 
occur up to 8 conditions.

 -

Name:

 Set the name of the area.

 -

 (Draw)

: Set the area on the screen in the form of 

a polygon.

 -

 (Erase)

: Select the polygon to erase.

 -

 (Move)

: Move the position of the polygon on the 

screen or the position of the polygon point.

 -

Direction

: Select the direction in which the object 

to be considered as an event crosses on each line. 

 

is when a movement is made from A to B on a 

line basis, 

 

is

 

when a movement is made from A 

to B on a line basis, and 

 

is

 

when a movement is 

made in both directions.

 -

Object

: Select the object (

Human, Car, Bike

) to 

detect in the area.

 -

Crossing Position Settings:

 Select the position 

of the object where the line event occurs(

Center 

of object, Upper side of object, Lower side of 
object

).

 •

Ignore Interval

: With Line Crossing Ignoring Interval 

configured, no event log or notification is generated 
for line crossing detected during a period of time 
following a line crossing event.

 •

Use Ignoring Time

: Define the event ignoring time. 

Line crossing detections taking place during the 
defined time range will not be assumed as events.

 •

Event Action

: Select a line crossing event alert action.

 -

Alarm Out

: Select if you wish to generate an alarm 

out.

 -

Send Email

: Select if you wish to send an email. 

Select the 

Image Attachment

 option to attach a 

.jpg image of the event detected to the email.

 -

Remote Callback

: Select this option to send a 

message to a remote system and then select which 
system to send the message to.

 • Not supported from the IDIS Web program.
 • The camera must be registered to the remote 

system in order to use the 

Remote Callback

 

feature.

 -

Audio Alarm

: Select this option to generate an 

audio alert and then choose an audio file.

 -

FTP Upload

: Select this option if you wish to 

upload images to the FTP server.

 -

Record

: Select this option to record video.

 •

Event Action

 settings must be configured 

correctly in order to perform event actions.

 • Line crossing works normally only when the 

distance between objects is sufficiently far apart.

Summary of Contents for DC-D4512WERA




















































Reviews: