Part 1 - Remote Setup
24
Alarm out
Select
Alarm Out
to enable alarm out.
•
Dwell Time
: Designate the alarm out duration. When
an event occurs, alarm out will be generated for the
specified duration.
•
Schedule
: Specify the alarm out schedule. Alarm out
is generated during the specified period only.
Select
to send out emails.
•
SMTP Server/Port
: Enter the SMTP server’s IP address
(or domain name) and port number you received
from the network administrator. If a DNS server has
been set up during network configuration, you can
enter a domain name instead of an IP address.
•
Test:
Enter the SMTP server and click
Test
button.
During normal operation, a pop-up window is
displayed asking to confirm the e-mail has been
received. Connect to the mail server and check if the
email has been received.
•
Use SSL/STARTTLS
: If using an SMTP server requiring
an SSL or STARTTLS connection, select
SSL
or
STARTTLS
option.
•
Authentication
: Enter a user ID and password if user
authentication is required by the SMTP server.
•
Sender/Recipient(s)
: Enter the sender and recipients’
addresses. (Up to 10) The addresses must be properly
formatted and include the @ symbol.
