Part 1 - Remote Setup
38
Loitering
Select
Loitering
and configure loitering settings. With
loitering event enabled, an event is considered when an
object is detected to wander for a certain period of time.
•
Zone
: Click
Setup
and define the loitering area and
the conditions for which a loitering event will occur in
each area up to 8 conditions.
-
Name:
Set the name of the area.
-
(Draw)
: Set the area on the screen in the form of
a polygon.
-
(Erase)
: Select the polygon to erase.
-
(Move)
: Move the position of the polygon on the
screen or the position of the polygon point.
-
(Edit)
: Add or delete polygon points.
-
Object
: Select the object (
Human, Car, Bike
) to
detect in the area.
-
Activation Time:
Select the minimum time to
detect loitering. If the set object wanders for more
than the set time, it is considered an event.
•
Ignore Interval
: With Loitering Ignoring Interval
configured, no event log or notification is generated
for loitering detected during a period of time
following a loitering event.
•
Use Ignoring Time
: Define the event ignoring time.
Loiterings taking place during the defined time range
will not be assumed as events.
•
Event Action
: Select a loitering event alert action.
-
Alarm Out
: Select if you wish to generate an alarm
out.
-
Send Email
: Select if you wish to send an email.
Select the
Image Attachment
option to attach a
.jpg image of the event detected to the email.
-
Remote Callback
: Select this option to send a
message to a remote system and then select which
system to send the message to.
• Not supported from the IDIS Web program.
• The camera must be registered to the remote
system in order to use the
Remote Callback
feature.
-
Audio Alarm
: Select this option to generate an
audio alert and then choose an audio file.
-
FTP Upload
: Select this option if you wish to
upload images to the FTP server.
-
Record
: Select this option to record video.
•
Event Action
settings must be configured
correctly in order to perform event actions.
