Part 1 - Remote Setup
39
Line Crossing
Select
Line Crossing
and configure line crossing
settings. With line crossing event enabled, an event
is considered when the set object in the set line and
direction passes
.
•
Line
: Click
Setup
and define the line and the
conditions for which each line crossing event will
occur up to 8 conditions.
-
Name:
Set the name of the area.
-
(Draw)
: Set the area on the screen in the form of
a polygon.
-
(Erase)
: Select the polygon to erase.
-
(Move)
: Move the position of the polygon on the
screen or the position of the polygon point.
-
Direction
: Select the direction in which the object
to be considered as an event crosses on each line.
is when a movement is made from A to B on a
line basis,
is
when a movement is made from A
to B on a line basis, and
is
when a movement is
made in both directions.
-
Object
: Select the object (
Human, Car, Bike
) to
detect in the area.
-
Crossing Position Settings:
Select the position
of the object where the line event occurs(
Center
of object, Upper side of object, Lower side of
object
).
•
Ignore Interval
: With Line Crossing Ignoring Interval
configured, no event log or notification is generated
for line crossing detected during a period of time
following a line crossing event.
•
Use Ignoring Time
: Define the event ignoring time.
Line crossing detections taking place during the
defined time range will not be assumed as events.
•
Event Action
: Select a line crossing event alert action.
-
Alarm Out
: Select if you wish to generate an alarm
out.
-
Send Email
: Select if you wish to send an email.
Select the
Image Attachment
option to attach a
.jpg image of the event detected to the email.
-
Remote Callback
: Select this option to send a
message to a remote system and then select which
system to send the message to.
• Not supported from the IDIS Web program.
• The camera must be registered to the remote
system in order to use the
Remote Callback
feature.
-
Audio Alarm
: Select this option to generate an
audio alert and then choose an audio file.
-
FTP Upload
: Select this option if you wish to
upload images to the FTP server.
-
Record
: Select this option to record video.
•
Event Action
settings must be configured
correctly in order to perform event actions.
• Line crossing works normally only when the
distance between objects is sufficiently far apart.
