7
Configure basic network camera settings and all other
system settings.
Screen images may vary depending on the model.
Remote Setup
1
Launch the IDIS Discovery program and then from
the main screen, select a network camera whose
settings you wish to change.
2
Click on the
Setup
icon.
3
Select
Remote Setup
from the
Setup
menu to load
the
Remote Setup
screen. Alternatively, you can
select
Network Camera
from the main screen and
then right-click to access the
Remote Setup
screen.
4
If you do not have a password, you must register a
password. Please enter your mobile phone number
(
required
) and email address (optional). If you
forget your password, you need to enter your mobile
phone number and email address to reset your
password. If you do not enter your mobile phone
number and email address and lose your password,
you need to initialize the device with the RESET
button on the camera, so be sure to memorize it.
5
Log in by entering the admin account and password
set above.
<Web Log In>
<IDIS Discovery Log In>
• IDIS Discovery connects to the default browser
during remote setup, so please use a supported
browser as the default browser.
• System settings can also be changed using a remote
program.
• Remote Setup works with the following web
browsers when the web browsers support HTML5:
Google Chrome, Edge, Mozilla Firefox, or Apple
Safari. It is recommended that you update the web
browser to the latest version.
Part 1 - Remote Setup
