Part 3 - Remote Setup
25
Streaming
• Primary/Secondary/Tertiary/Quaternary:
Multistreaming is supported. (priority: Primary >
Secondary > Tertiary > Quaternary). Enable/disable
streaming use. The lower stream settings may change
depending on higher stream settings. The tertiary and
quaternary streams may not be available depending
on higher stream settings (refer to the table below).
DC-F1111
Primary
Secondary
Tertiary
Quaternary
Resolution
ips
Resolution
ips
Resolution
ips
Resolution
ips
1280x720
30
1280x720
30
-
-
-
-
DC-F1211
Primary
Secondary
Tertiary
Quaternary
Resolution
ips
Resolution
ips
Resolution
ips
Resolution
ips
1920x1080
30
1280x720
10
1280x720
1
-
-
1920x1080
30
1280x720
10
352x240
10
-
-
1920x1080
30
704x480
30
-
-
-
-
1920x1080
30
704x480
15
704x480
15
-
-
1920x1080
15
1920x1080
15
704x480
30
-
-
1920x1080
15
1280x720
30
1280x720
15
-
-
• Compression: Choose the streaming compression
method.
• Resolution: Choose a resolution setting for video
streaming. The resolution varies depending on the
camera model. The current stream resolution cannot
be higher than the higher stream resolution.
• Quality: Choose a quality setting for video streaming.
• Bitrate Control: Choose a bitrate control mode for
H.264 compression.
- CBR (Fixed Bitrate): Maintains the current bitrate
regardless of motion change in the video.
- VBR (Variable Bitrate): Bitrate varies depending
on motion changes in the video. Less movement
places less load on the network and takes up less
storage space.
• Frame Rate: Choose a frame rate setting for video
streaming. The fame rate of the current stream cannot
be higher than the fame rate of the higher stream if
those stream resolutions are same.
• Default Record Stream: Choose a stream to use
for recording. This setting, however, may not apply
if a recording stream has been designated from the
remote program.
