background image

Part 1 - Getting Started

15

Set Camera Password

For IDIS protocol cameras that support changing and 
finding the camera password, you must set the camera 
password at the time of initial camera registration. The 
email information is used to change and find the camera 
password.

 

Go To Camera

Moves the focus automatically to the camera using the 
MAC addressa and model of camera in the camera list.

Search Scope

Filters the cameras in the camera list depending on the 
search scope such as specified IP address rang

Screen Auto. Assign

Assigns the detected cameras on the video display area.

Camera list

By using the camera information file, .csv, the user can 
register the cameras easily.

 

Export : 

Button : Exports the list of camera 

information on USB as a .csv file

 

Import : 

Button : Imports a camera information file, 

.csv file. The user can edit a csv file directly.

 

A column indicates camera number, B  
column the camera MAC address, C column  
the Video In port of the video encoder in the  
.csv file. C column indicates only for video 
encoders. If camera information displays  
as follows: 5,00:11:22:18:30:20,3, 5 = CAM 5,  
5,00:11:22:18:30:20 = MAC address, 3 means video 
encoder. 

 

Before using this feature, the cameras must be 
scanned first. If the cameras to be registered  
do not exist in the list, the camera cannot be 
registered.

 

This feature is not supported for the third-party 
cameras.

Summary of Contents for DR-1508P






















































































Reviews: