Part 2 - Configuration
39
Once
Run the failover
have made to the camera, the
camera will reboot automatically.
Once you have run failover on the camera, the camera
will reboot automatically. By selecting
System,
Network, Device Health Status, Storage Status,
or
Camera Status
, you can see the brief results of the self-
diagnosis for the target device.
The NVR
self-diagnostic report
can only be viewed in
text form.
This feature is also supported when connected to the
NVR from a remote program.
We recommend clicking the
Export
button at the
bottom of the list, which allows you to view the reports
on a PC web browser. We also recommend scanning
the self-diagnostic report on a remote program, which
allows you to view the reports in HTML format as shown
below.
About
