Part 2 - Configuration
54
Smart Failover
When the connection is recovered again, Smart Failover
Service enables the data recorded on SD memory card
to record on NVR.
●
Recording Failover Service
: Use this option to
record the data recorded on SD memory card on NVR
Recorded Date:
●
Recorded Data
: Indicates the time information of the
recorded data.
●
Status
: Indicates the current status of the recorded
data.
•
This function supports only if selecting the
Recording Failover Serivce
.
•
This function is only supported for the cameras
supporting Failover recording of SD memory card.
•
If the camera is reconnected during recording, the
video recording will restart from the beginning.
Event Setup
Refer to the
for basic
information on using the Setup menus.
Video-Analytics
Video-Analytics methods are Motion, Trip Zone, and
Tampering.
Motion
●
No.
: Select which cameras to apply Motion Detection
to.
●
Sensitivity
: Set daytime and nighttime sensitivity
settings between 1 (Low) and 5 (High).
●
Zone
: Define the motion detection block.
