Part 1 – Introduction
14
3
Assemble the cable rubber to the bottom cover.
4
Attach the enclosed desiccant in the bottom to
prevent moisture.
Desiccant
5
Connect the safety wire with the bracket. Fasten the
screws for the bottom cover clockwise using the
allen wrench provided with the camera.
6
Connect external devices, the network cable, and
the power adapter.
7
Adjust the angle. For more information, refer to the
.
Closing the Dome Cover
Fasten the screws for the dome cover clockwise using
the allen wrench provided with the camera.
Remove the protective film inside and outside before
closing the dome cover.
