Part 2 - Configuration
45
RTSP
RTSP service allows you to monitor real-time using the
Real-Time Streaming Protocol.
•
RTSP Port:
Set the port number of the RTSP server
obtained from your system administrator.
•
RTP Port:
Set the start/end port number of the RTP
server obtained from your system administrator.
•
You can access a remote DVR and monitor live
video images using media players, such as
VLC Player, supporting RTSP service. Start the
media player on your local PC and enter “rtsp://
ID:Password@IP address:RTSP port number/
trackID=‘channel number’&streamID=’stream
number’”.
•
Some media players might not play video
properly depending on network conditions.
•
RTSP service might not be supported, depending
on the type of media player.
Notification Setup
Callback
Configure Callback settings.
•
LAN:
Enter the IP address of the receiving server and
set
Retry
to between 1 and 10 in case of connection
failure.
•
Push:
Send out event-related messages to mobile
phone.
Enable to receive the event occured in DVR on the
mobile phone(Android, iOS). The DVR must be
registered and set in mobile phone.
