background image

Part 2 - Configuration

58

• 

Site Information

: Displays the FTP site information.

 

For the FTP notification to work properly, the related 
settings should be configured:

    

 - 

Network menu - NetFS tab - Use setting

     - Event menu - Actions - EventUpload setting

 

When you delete the FTP site in the NetFS setup 
screen on the Network menu, the FTP site in the 
FTP setup screen on the Notification menu will be 
deleted, too.

 

If many event occurs during a short period, images 
may not be uploaded on the FTP site.

 

The FTP notification is not supported for system 
events.

 

If upload fails several times, it deletes the images or 
video clips.

 

When the DVR boots, it deletes all images and video 
clips even if they were not uploaded yet.

Schedule

Select the + icon at the lower left corner of the screen to 
add a notification schedule.

• 

Day

: Add different schedules for different days of the 

week.

• 

Range

: Change the event notification time frame.

• 

 

Notify

: Select which notifications to generate when an 

event occurs. Select 

Mail

LAN 1 through 5

SNS

FTP,

 

Push, 

and/or 

Alert Window

.

 

In order to use the 

Notification

 (Callback) feature, 

the DVR must be registered on the remote program. 

 

Select the   icon to delete the existing schedule.

• 

Summary Email Interval

: Transmit event summary 

emails to a remote destination at specified intervals.

Summary of Contents for TR-4108

















































































Reviews: