Part 2 - Configuration
57
SMTP Setup
Select
SMTP Setup
at the bottom right corner of the
screen to configure an SMTP server.
1
Enter the
SMTP Server
’s IP address or domain name
and then configure the
Port
and
Sender
settings.
Default SMTP server port number is
25
. Select
Test
to
send out a test mail using the current settings. Select
SSL/TLS or STARTTLS depending on the security
connection which the server supports.
•
If you have configured the DNS Server setting
under
Network - IP Address
, you can enter the
STMP server's domain name instead of its IP
address in the
SMTP Server
field.
•
Select the icon to select the mail server
provider from a list of registered SMTP mail
server providers.
•
Address entered under
Sender
must be in the
correct email format and include the @ symbol.
If user authentication is required by the SMTP server,
select
Use
and then enter the
User
and
Password
information.
2
Select
OK
to apply and exit.
This product contains content developed by OpenSSL
Project for use in Open SSL Toolkit (http://www.
openssl.org/).
FTP
The FTP feature uploads event detected image or video
clip on the FTP site when an event occurs. Select the +
icon at the bottom of the list to add a FTP site.
•
FTP
: Enter the FTP site information using the virtual
keyboard.
•
Uploade File
: Select the file format to be uploaded on
the FTP site. the time frame to schedule.
The FTP site can be registered up to 5.
Select the + icon at the bottom of the list to add a FTP
site.
•
Site
: Display a list of the registered FTP sites. Select an
FTP site from the list. If the Use setting of the NetFS
site is set to other than
ALL
or
Clip-Copy
, you cannot
select the FTP site. You can change the Use setting or
register other FTP sites in the NetFS setup screen on
the Network menu.
