FDX-32 User
’s Guide
26
7 Basic operation
7.1 Selecting Input/output channel
[Fig. 7.1] Selecting I/O channel
You can check the input/output channel status in the
“8.2.1 Displaying current I/O channel status
.
Procedure
1
Select the desired switching mode
using the
“SWITCHING MODE”
key.*
1
2
Press the
“INPUT” key to move to the
input channel selection LCD
screen.*
2
3
Select the desired input channel
using
“0” to “9” or “OFF” key.*
3
4
Press the
“OUTPUT” key to move to
the output channel selection LCD
screen.*
2
5
Select the desired output channel
using 0 to 9 or
“ALL” key.*
3
(When it is settable, a line break
symbol appears at the lower right of
the LCD screen.)
6
Press the
“SET” key to apply the
setting of I/O channel.
(When the setting is fixed, a
“*”
appears at the lower right of the LCD
screen.)
SET
OUTPUT
ALL
INPUT
OFF
9
8
7
6
5
4
0
3
2
1
LOAD
PRESET
MENU
/SET
ESC
V&A
VIDEO
AUDIO
SWITCHING MODE
Selecting
input/output
channel
1
2
3, 5
3
4
5
6
[CHANNEL SELECT]
IN:
1
OUT:
[CHANNEL SELECT]
IN: 1 OUT:
[CHANNEL SELECT]
IN: 1 OUT:
1
2
3
4
5
Example: Setting Video/Audio signals of input channel 1 to output channel 1.
[CHANNEL SELECT]
IN: OUT:
[CHANNEL SELECT]
IN: 1 OUT:
1
*
6
