FDX-32 Users Guide
79
8.12.6 Top page [TOP DISPLAY]
Using menu
OTHERS → TOP DISPLAY
Set value
OFF: Normal [Default]
ON: Statuses of input signals and sink device are displayed.
If you select
“ON” and press “▲” and “▼” keys while the top page is being displayed, pages displaying
statuses of input signals (four pages) and sink device (two pages) can be displayed.
The desired I/O cannel can be selected by
“◄” and “►” keys in each screen.
Displayed contents
1
①
Input channel number
②
Input resolution
③
Input vertical synchronous frequency
When there are no input signals:
“No Signal” is displayed.
When input slot board is not mounted:
“
-------------
“ is displayed.
2
④
Input signals
d : DVI signals, without HDCP
D : DVI signals, with HDCP
h : HDMI signals, without HDCP
H : HDMI signals, with HDCP
⑤
Color depth
08:24 bit/pixel (8 bit/component)
10 :30 bit/pixel (10 bit/component)
12 :36 bit/pixel (12 bit/component)
⑥
YUV
When there are no input signals:
“No Signal” is displayed.
When input slot board is not mounted:
“
------------
“ is displayed.
3
⑦
Input audio signals
L-PCM: Linear PCM
COMPRESSED AUDIO: Compressed audio
⑧
Input sampling frequency
When there are no input signals:
“No Signal” is displayed.
When input slot board is not mounted:
“
------------
“ is displayed.
Input signal status 2
Input signal status 1
1
2
①
②
③
[INPUT STATUS 1]
01:1920x1080p 59.94
[INPUT STATUS 2]
01:H08 444 YUV 709L
① ④⑤
⑥
Input signal status 3
3
[INPUT AUDIO STATUS]
01:L-PCM 48kHz
①
⑦
⑧
