FDX-32 Users Guide
45
8.4.7 Brightness [INPUT BRIGHTNESS]
Using menu
INPUT TIMING
→
INPUT BRIGHTNESS
For
Each input
Set value
100 %
：
100% [default]
80 % to 120 %
：
80 % to 120 %
【
NOTE
】
This menu can be selected if FDX has scan converter output slot boards.
8.4.8 Gamma [INPUT GAMMA]
By setting value to lower value, the gradation of black is increased and feeling darker. By setting value to
higher value, the gradation of white is increased and feeling brighter. Gamma adjustment does not adjust
black and white levels but halftone is changed while brightness adjusts black and white levels.
Using menu
INPUT TIMING
→
INPUT GAMMA
For
Each input
Set value
0.1 LOW MIN to 0.9 LOW
：
emphasizing darkness
1.0 NORMAL
：
no adjustment [default]
1.1 HIGH to 3.0 HIGH MAX
：
emphasizing brightness
【
NOTE
】
This menu can be selected if FDX has scan converter output slot boards.
