FDX-32 User
’s Guide
68
8.8.12 Dolby TrueHD Audio [EDID Dolby TrueHD]
The maximum sampling frequency of Dolby TrueHD Audio that is output from the source device
【
See: 8.8.1 EDID resolution [EDID DATA]
Using menu
EDID → EDID Dolby TrueHD
For
Each input connector (IN1 to IN32)
Set value
OFF [Default]
44.1kHz
48kHz
88.2kHz
96kHz
176.4kHz
192kHz
【
NOTE
】
If you do not press the
“SET” key, the setting is not changed.
For LCD monitors and the like, some audio formats are not supported. Select the audio format and
sampling frequency that are supported by the connected devices.
If EDID resolution is set to “05” to “24”, this menu will be valid.
Channels that do not have an input slot board cannot be selected in this menu.
8.8.13 WXGA [EDID WXGA SELECT]
Set the number of pixels of WXGA according to the resolution setting of EDID
【
See: 8.8.1 EDID resolution [EDID DATA]
Using menu
EDID → EDID WXGA SELECT
For
Each input connector (IN1 to IN32)
Set value
1360x 768 [Default]
1366x 768
【
NOTE
】
If you do not press the
“SET” key, the setting is not changed.
If EDID resolution is set to “05”, “08”, “16” to “22”, this menu will be valid.
Channels that do not have an input slot board cannot be selected in this menu.
