FDX-S Series User Guide
111
11.15 FDX-SOV4UT
Item
Description
Output
4 outputs
Video
HDBaseT
HDBaseT
HDCP 1.4/2.2
36 bit Deep Color, x.v.Color, 3D, HDR
For WQHD, WQXGA, and 4K@24/25/30 (4:4:4)/50(4:2:0)/60 (4:2:0), Deep Color is not supported.
ARC/HEC/CEC are not supported.
RS-232C, LAN
Format
VGA to 4K (Dot clock: 25 MHz to 600 MHz)
For WQHD/WQXGA, only Reduced Blanking is supported.
480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K
For 4K format, 24 Hz/25 Hz/30 Hz/50Hz (4:2:0)/60 Hz (4:2:0) are supported.
Audio
Digital
Multi-channel LPCM up to 8 channels
Sampling frequency: 32 kHz to 192 kHz, Sample size: 16 bit to 24 bit
Reference level: -20 dBFS, Max. output level: 0 dBFS
Connector
RJ-45 (*1)
Cable
CAT.5E HDC, Cat5e UTP/STP, Cat6 UTP/STP (T568A/T568B straight-through)
Maximum transmission distances
328 ft. (100 m), 492 ft. (150 m) (Long reach mode is used) (*2)
Functions
Anti-snow, Connection Reset (*3)
General
Power consumption
About 18 Watts
Weight
1.1 lbs. (0.5 kg)
Temperature
Operating : 32°F to 104°F (0°C to +40°C)
Storage : -4°F to +176°F (-20°C to +80°C)
Humidity
Operating/Storage: 20% to 90% (Non Condensing)
*1
RJ-45 (HDBaseT
connector) is only for extending digital video and audio signals over a Cat5e/Cat6 cable. Use it with IDK’s HDBaseT Products. Do not use for LAN devices.
*2
The maximum transmission distance was obtained when IDK’s CAT.5E HDC cable was used. The distance may not be extended with some device combinations, cabling
method, or other manufacturer’s cable. Video may be disturbed or may not be output even if signals are within the range mentioned above.
The maximum transmission distance is the shorter distance of co
nnected HDBaseT product or sink device’s maximum transmission distance.
Up to 492 ft. (150 m): 1080p (24 bit) in Long reach mode. For Long reach mode, use IDK’s HDBaseT Products that supports 328 ft. (100 m) or longer.
*3
For digital systems, some problems, such as an HDCP authentication error, can often be recovered by physically disconnecting and reconnecting the digital cables. However,
the Connection Reset feature will fix these problems automatically without the need to physically plug and unplug the cables. It creates the same condition as if the cable were
physically disconnected and reconnected. This feature only works for the FDX-S
’s output. If other devices are connected between the FDX-S’s output and sink device, this
feature may be invalid.
11.16 FDX-SRP16
Item
Description
Power
100 - 240 VAC ± 10%, 50 Hz/60 Hz ± 3 Hz, 2 power connectors
Weight
6 lbs. (2.7 kg)
Temperature
Operating : 32°F to 104°F (0°C to +40°C)
Storage : -4°F to +176°F (-20°C to +80°C)
Humidity
Operating/Storage: 20% to 90% (Non Condensing)
11.17 FDX-SRP32
Item
Description
Power
100 - 240 VAC ± 10%, 50 Hz/60 Hz ± 3 Hz, 2 power connectors
Weight
10.6 lbs. (4.8 kg)
Temperature
Operating : 32°F to 104°F (0°C to +40°C)
Storage : -4°F to +176°F (-20°C to +80°C)
Humidity
Operating/Storage: 20% to 90% (Non Condensing)
