HDC-RH401/201/101 Users Guide
23
7.3 Notes on use
1) Extension distance is 60 m / 196.85 ft. using Cat6 or CAT.5E HDC cable. If you connect this unit to other
HDC series products which support 100 m / 330 ft., the maximum extension distance will be shorter one
(60 m / 196.85 ft.).
2) Input power is 90V to 250V. Please make sure before you turn on the unit.
3) xvYCC, Lip Sync, HEC, 3D, and ARC are not supported.
4)
For DVI signal output, please use
HDMI→DVI-I or DVI-D conversion cable (DualLink DVI is not
supported).
5)
CEC is pass through between INPUT and OUTPUT which is selected in
Please test CEC connection before you use other manufacturers source and sink devices.
6)
Audio format which is shown in below table are supported. Factory default setting is 2ch liner PCM. If you
use other format, please select internal EDID and select expected audio format.
7) 10bit/component (30bit/pixel) and 12bit/component (36bit/pixel) Deep Color are supported. If you cannot
get Deep Color output from source device, please set Deep Color setting of the HDC, and then set the
source device video settings. Factory default is 8bit/component (24bit/pixel).
8)
Please use IDK’s HDC receiver and transmitter when you want to transmit DVI signal which has HDCP.
9)
If you got any trouble, please see
[Table 7.1] Supported digital audio format
Audio format
Details
Example of medias
2 channel liner PCM
2ch, 32 to 192 kHz
、
16/20/24 bit
CD, DVD-Video,
DVD-Audio
Multi channel liner PCM
8ch, 32 to 192 kHz
、
16/20/24 bit
DVD-Audio
AC-3, Dolby Digital, DTS
Bit stream
DVD-Video
Dolby , DTS-HD, Dolby
TrueHD
Bit stream
HD DVD, Blu-ray Disc
AAC
Bit stream
TV broadcast
