HDC-UHD Series User Guide
72
9.8.2 Sink device EDID check
You can set the sink device’s EDID checking mode.
Menu
C20 to C24: OUT1 to OUT5
WEB menu OUTPUT SETTINGS
→
EDID ERR OUTPUT MODE
Setting value
[Table 9.34] Sink device EDID check
Setting
Front
WEB browser
In case of EDID load error, the sink device is treated as a DVI device
[Default]
oFF
OFF
In case of EDID load error, the sink device is treated as a HDMI device
without SCDC
Er1
ERROR1
Always treats sink device as a HDMI device without SCDC
AL1
ALWAYS1
In case of EDID load error, the sink device is treated as a HDMI device
with SCDC
Er2
ERROR2
Always treats sink device as a HDMI device with SCDC
AL2
ALWAYS2
The HDC gets EDID from the sink device and determines if the sink device is an HDMI device or DVI device
in order to output HDMI signals. However, if the HDC cannot get EDID for some reasons, problems such as
no audio output and the like may occur. In these cases, HDC recognized the connected sink device is HDMI
or DVI device and output signal as HDMI or DVI mode depending on its setting.
Notes:
・
If setting this menu to a value other than the default (oFF, OFF), set “
” to a supported
resolution other than “01” (External EDID).
・
This setting is applied when HDMI signal is input and “
” is set to a format other than
DVI.
【
See: 9.8.3 Output format
