MSD-72 Series User’s Guide
30
8.2 Selecting input channels
Video and audio signal can be switched simaltanuously or independently.
Press the SWITCHING MODE key to switch video and audio signal, and then use the input channel selection
keys to select input channels of video and audio signal for each output channel.
SWITCHING MODE
When the “V&A” or “VIDEO” LED lights, input and output settings of video signal are shown by the CHANNEL
SELECT keys.
When the “AUDIO” LED lights, input and output settings of audio signal are shown by the CHANNEL SELECT
keys
[Table 8.3] Switching mode
Switching mode
Discription
V&A
Video and audio simultaneously
VIDEO
Video
AUDIO
Audio
[Figure 8.1] Selects switching mode
Output IN1 input signal to OUT1
Output IN3 input signal to OUT2
OFF
IN 7
IN 6
IN 5
IN 4
IN 3
IN 2
IN 1
OUT 1
OUT 2
IN 8
IN 9
OUT 3
OUT 4
CHANNEL SELECT
Output IN5 input signal to OUT3
Output IN7 input signal to OUT4
[Figure 8.2] Input/output signalelection
