MSD-72 Series User’s Guide
73
9.7 Output settings
9.7.1 Output mode
Menu Top
→
OUTPUT SETTING
→
OUTPUT MODE
Setting for Each output channel
Setting value
・
HDMI YCbCr 4:4:4 MODE [Default]
・
HDMI YCbCr 4:2:2 MODE
・
HDMI YCbCr 4:2:0 MODE
・
HDMI RGB MODE
・
DVI MODE
You can select an output signal mode and color space of the output video. The MSD outputs selected mode,
however, if the connected sink device has optimal output mode and color space, the MSD outputs optimal
output mode signal for the connected sink device. With “HDMI YCbCr 4:2:0 MODE”, YCbCr 4:2:0 has priority
if the signal is 4K@60 / 59.94 / 50, and with other resolutions, YCbCr 4:4:4 has priority.
Higher priority
HDMI YCbCr 4:4:4 MODE
HDMI YCbCr 4:2:2 MODE
HDMI YCbCr 4:2:0 MODE
HDMI RGB MODE
Lower priority
DVI MODE
Note:
If “DVI MODE” is selected, the MSD can output DVI signal at 1080p, QWXGA, or lower resolution. For other
resolutions, it outputs signal at the appropriate resolution of the connected sink device.
9.7.2 Synchronous signal output with no input video
Menu Top
→
OUTPUT SETTING
→
SYNC OUTPUT
Setting for Each output channel
Setting value ON [Default], OFF
You can set whether synchronous signal is output when no video signal is input from the selected input, or
when “OFF” is selected for the input. If you set this menu to “ON”, you can prevent the sink device from being
switched to the standby mode.
9.7.3 Output video with no input video
Menu Top
→
OUTPUT SETTING
→
VIDEO OUTPUT
Setting for Each output channel
Setting value
・
BLUE [default]
・
BACKGROUND COLOR
・
BLACK
You can set the color of the video to be output when no video signal is input from the selected input. The
setting will be valid when
“9.7.2 Synchronous signal output with no input video”
is set to “ON”.
