MSD-72 Series User’s Guide
58
9.4 Quality settings
Setting items for input channels are for correcting color bias.
Image quality to be output can be set for each input side (input channels) and output side (output channels) as
follows.
Output
signals
Input
signals
HUE
SETUP
SATURATION
CONTRAST
Setting for input channels
Setting for output channels
SHARPNESS
BRIGHTNESS
BRIGHTNESS
CONTRAST
[Figure 9.8] Video correction
9.4.1 Sharpness
Menu Top
→
IMAGE EFFECT
→
INPUT SHARPNESS
Setting for Each input channel, each input signal
Setting value -5 to +15 [Default]:0
You can set the sharpness of input signal.
9.4.2 Brightness
Menu Top
→
IMAGE EFFECT
→
INPUT BRIGHTNESS (Input side)
/OUTPUT BRIGHTNESS (Output side)
Setting for Input side
: Each input channel, each input signal
Output side : Each output channel
Setting value 80% to 120% [Default]:100%
You can set the brightness of input/output signal.
9.4.3 Contrast
Menu Top
→
IMAGE EFFECT
→
INPUT CONTRAST (Input side) / OUTPUT CONTRAST (Output side)
Setting for Input side : Each input channel, each input signal
Output side : Each output channel
Setting value R / G / B
: 0% to 200% [Default]:R / G / B: 100%
You can set the contrast of video image.
If you set “LINK” to ”ON”, only settings of ”R” can be set, and “G” and “B” change relatively.
