MSD-804FD Users Guide (Command Guide)
69
@SAT
Set test tone
Command format
@SAT,
ch_1
,
tone_1
,
speaker_1 (
,
ch_2
,
tone_2
,
speaker_2
・・・
)
Return value
format
@SAT,
ch_1
,
tone_1
,
speaker_1 (
,
ch_2
,
tone_2
,
speaker_2
・・・
)
Parameter
ch_1-4
: Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
tone_1-4
: Test tone
0 = OFF [Default], 1 = 1 kHz, 2 = 400 Hz
speaker_1-4
: Speaker
0 = ALL [Default], 1 = FRONT L/R, 2 = REAR L/R,
3 = REAR L/R CENTER, 4 = FRONT LEFT, 5 = FRONT RIGHT,
6 = LOW FREQUENCY EFFECT, 7 = FRONT CENTER, 8 = REAR LEFT,
9 = REAR RIGHT, 10 = REAR LEFT CENTER, 11 = REAR RIGHT
CENTER
Example Send
Receive
@SAT,1,1,0
@SAT,1,1,0
Output 1-kHz test tone to all speakers of OUT1.
Terminated normally.
Related info.
8.8.11 Test tone
@GAT
Get test tone
Command format
@GAT
Return value
format
@GAT,
t_out_1
,
s_out_1 (
,
t_out_2
,
s_out_2
,
t_out_3
,
s_out_3
,
t_out_4
,
s_out_4 )
Parameter
t_out_1-4
: Test tone of each output channel
0 = OFF [Default], 1 = 1 kHz, 2 = 400 Hz
s_out_1-4
: Speaker
0 = ALL [Default], 1 = FRONT L/R, 2 = REAR L/R,
3 = REAR L/R CENTER, 4 = FRONT LEFT, 5 = FRONT RIGHT,
6 = LOW FREQUENCY EFFECT, 7 = FRONT CENTER, 8 = REAR LEFT,
9 = REAR RIGHT, 10 = REAR LEFT CENTER, 11 = REAR RIGHT
CENTER
Example Send
Rece
ive
@GAT
@GAT,2,1,0,0,0,0,0,0
Get output settings of test tone
OUT1: 400-Hz test tone to FRONT L/R;
other outputs: No test tone
Related info.
8.8.11 Test tone