NJR-TW01UHD/NJR-RW01UHD Command Guide
18
4.4 Parameter input format
Parameter input formats are common for each setting.
If a command is input from the LAN connector of the NJR-TW01UHD (LAN model) or NJR-RW01UHD using
the IP-NINJAR Configurator, “1” (fixed) is specified to “ch” (channel) because only one NJR-TW01UHD (LAN
model) or NJR-RW01UHD can be controlled.
If a command is input from the NJR-CTB, any channel can be specified because multiple NJR-W01UHD
devices that are connected over a network switch can be controlled.
Example:
Format
@SAM, device, ch, port, mute
Parameter
device: Model
1 = NJR-TW01UHD, 2 = NJR-RW01UHD
ch: Channel
1 to 512 = Channel 1 to Channel 512
If a command is input from the IP-NINJAR Configurator, “1” is set (fixed).
port: Connector
“1” fixed
mute: Audio mute
0 = Mute OFF [Default], 1 = Mute ON
PC for control
LAN cable
NJR-TW01UHD (LAN model)
NJR-RW01UHD
Fiber optic cables
@SAM,1,1,1,1
@SAM,2,1,1,1
[Fig. 4.1] Command input from IP-NINJAR Configurator
