NJR-TW01UHD/NJR-RW01UHD Command Guide
24
@GEN / @SEN
HDCP output
Getting
Command
@GEN, device, ch, reserved
Response
@GEN, device, ch, reserved, hdcp
Setting
Command
@SEN, device, ch, port, hdcp
Response
@SEN, device, ch, port, hdcp
Parameter
device: Model
“2” fixed
ch: Channel
1 to 512 = Channel 1 to Channel 512
If a command is input from the IP-NINJAR Configurator, “1” is set (fixed).
reserved: Reservation
“1” fixed
port: Output connector
“1” fixed
hdcp: HDCP output
1 = ALWAYS [Default], 2 = HDCP INPUT ONLY, 3 = HDCP 2.2
Getting
example
Command
Response
@GEN,2,1,1
@GEN,2,1,1,1
Description Getting the HDCP output of NJR-RW01UHD Channel 1
ALWAYS
Setting
example
Command
Response
@SEN,2,1,1,2
@SEN,2,1,1,2
Description Setting the HDCP output of NJR-RW01UHD Channel 1 to HDCP INPUT ONLY
Completed
Remarks
The NJR-TW01UHD does not support this command.
