NJR-TW01UHD/NJR-RW01UHD Command Guide
38
4.5.2.8 Information
@GSS
I/O status
Getting
Command @GSS, device, ch, port, mode
Response
@GSS, device, ch, port, mode, status_1 (, status_2, status_3
･･･
)
Parameter
device: Model
1 = NJR-TW01UHD, 2 = NJR-RW01UHD
ch: Channel
1 to 512 = Channel 1 to Channel 512
If a command is input from the IP-NINJAR Configurator, “1” is set (fixed).
port: Input connector/Output connector
“1” fixed
mode: Target status
For HDMI input connector of NJR-TW01UHD:
0 = All of 1 to 4,
1 = Input signal type
*1
,
2 = Video input signal format
*2
,
3 = Audio input signal format
*3
,
4 = with/without HDCP input
*4
For HDMI output connector of NJR-TW01UHD/NJR-RW01UHD:
10 = All of 11 to 13,
11 = HDCP authentication status
*5
,
12 = Output signal type
*6
,
13 = Error code
*7
status_1 to status_4: Status
*1 For input signal type, one of the following values is returned
Hxx
HDMI signal is input. xx stands for color depth which is 24, 30, or
36
D
DVI signal is input.
N
No signal is input.
*2 For format of video input signal
Reply example
Description
1920 x 1080i
59.94Hz
SDTV/HDTV/UHDTV signal is input, which returns the
format type and vertical sync frequency.
800 x 600p 60.00Hz
Signal having VESA resolution is input, and [Horizontal
resolution x Vertical resolution] and vertical sync
frequency are returned.
NO SIGNAL
No signal is input.
