NJR-TW01UHD/NJR-RW01UHD User Guide
46
9.4.4 Deep Color
You can set the color depth that is output from the source device.
Setting value
24-BIT COLOR [Default]
30-BIT COLOR
36-BIT COLOR
Note:
If you select “30-BIT COLOR” or “36-BIT COLOR”, the transmission clock speed increases. Noise may occur
if a bad-quality cable or long cable is connected. In these cases, the noise may be removed by selecting
“24-BIT COLOR”.
For 4K@50/59.94/60 (YCbCr 4:4:4), “24-BIT COLOR” is selected automatically regardless of this menu’s
setting.
Communication command
@SDI
Setting Deep Color input
@GDI
Getting Deep Color input
9.4.5 Audio format
You can set the audio format and maximum sampling frequency to be output from a source device.
Note:
Some formats are not supported; select an audio format and sampling frequency that are supported by the
device you use.
Setting value
[Table 9.4] Audio format
Audio format
Max. sampling frequency (kHz)
Default
PCM
32/44.1/48/88.2/96/176.4/192
48
Dolby Digital
OFF/32/44.1/48
OFF
AAC
OFF/32/44.1/48/88.2/96
OFF
Dolby
OFF/32/44.1/48
OFF
DTS
OFF/32/44.1/48/96
OFF
DTS-HD
OFF/44.1/48/88.2/96/176.4/192
OFF
Dolby TrueHD
OFF/44.1/48/88.2/96/176.4/192
OFF
Communication command
@SAF
Setting audio format
@GAF Getting audio format
NJR-TW01UHD
NJR-TW01UHD
