NJR-TW01UHD/NJR-RW01UHD User Guide
48
9.5 Setting RS-232C
Only the NJR-TW01UHD (RS-232C model) and NJR-RW01UHD support RS-232C communication settings.
9.5.1 RS-232C communication
The same setting should be set for RS-232C communication of devices.
Note:
For communicating between the NJR-TW01UHD (RS-232C model)/NJR-RW01UHD and connected device,
only RD (Received data) and TD (Transmitted data) are sent.
Setting value
[Table 9.6] RS-232C setting items
Setting items
Setting value
Default
Baud rate [bps]
4800, 9600, 19200, 38400, 57600, 115200
9600
Data bit length [bit]
7, 8
8
Stop bit [bit]
1, 2
1
Parity check
NONE, EVEN, ODD
NONE
Communication command
@SCTB Setting RS-232C communication
@GCTB Getting RS-232C communication setting
NJR-TW01UHD/NJR-RW01UHD
