NJR-TW01UHD/NJR-RW01UHD Command Guide
27
@GAAS / @SAAS
Output audio
Getting
Command
@GAAS, device, ch, reserved
Response
@GAAS, device, ch, reserved, analog, digital
Setting
Command
@SAAS, device, ch, reserved, analog, digital
Response
@SAAS, device, ch, reserved, analog, digital
Parameter
device: Model
“2” fixed
ch: Channel
1 to 512 = Channel 1 to Channel 512
reserved: Reservation
“1” fixed
analog: Analog audio output connector
0 = Analog input audio [Default], 1 = Digital input audio
digital: Digital audio output connector
0 = Analog input audio, 1 = Digital input audio [Default]
Getting
example
Command
Response
@GAAS,2,1,1
@GAAS,2,1,1,0,1
Description Getting the output audio of Channel 1
Analog input audio is output from the analog audio output connector
Setting
example
Command
Response
@SAAS,2,1,1,0,1
@SAAS,2,1,1,0,1
Description Setting analog input audio to be output from the analog audio output connector of
Channel 1
Completed
Remarks
The NJR-TW01UHD does not support this command.
This command can be input only via the NJR-CTB command server.
