NJR-TW01UHD/NJR-RW01UHD Command Guide
22
@GHE / @SHE
HDCP input enabled/disabled
Getting
Command
@GHE, device, ch, port
Response
@GHE, device, ch, port, hdcp
Setting
Command
@SHE, device, ch, port, hdcp
Response
@SHE, device, ch, port, hdcp
Parameter
device: Model
“1” fixed
ch: Input setting
1 to 512 = Input channel 1 to Input channel 512
If a command is input from the IP-NINJAR Configurator, “1” is set (fixed).
port: Input connector
“1” fixed
hdcp: HDCP input enabled/disabled
0 = DISABLE, 1 = ENABLE [Default]
Getting
example
Command
Response
@GHE,1,1,1
@GHE,1,1,1,0
Description Getting the HDCP input enabled/disabled of Channel 1
HDCP disabled
Setting
example
Command
Response
@SHE,1,1,1,0
@SHE,1,1,1,0
Description Disabling HDCP input of Channel 1
Completed
Remarks
The NJR-RW01UHD does not support this command.
