NJR-TW01UHD/NJR-RW01UHD Command Guide
30
@GDI / @SDI
Deep Color input
Getting
Command
@GDI, device, ch, port
Response
@GDI, device, ch, port, color
Setting
Command
@SDI, device, ch, port, color
Response
@SDI, device, ch, port, color
Parameter
device: Model
“1” fixed
ch: Input setting
1 to 512 = Input channel 1 to Input channel 512
If a command is input from the IP-NINJAR Configurator, “1” is set (fixed).
port: Input connector
“1” fixed
color: Color depth
0 = 24-BIT COLOR [Default], 1 = 30-BIT COLOR, 2 = 36-BIT COLOR
Getting
example
Command
Response
@GDI,1,1,1
@GDI,1,1,1,0
Description Getting the color depth of Channel 1
24-BIT COLOR
Setting
example
Command
Response
@SDI,1,1,1,0
@SDI,1,1,1,0
Description Setting the color depth of Channel 1 to 24-BIT COLOR
Completed
Remarks
The NJR-RW01UHD does not support this command.
