(C) IDM ENERGIESYSTEME GMBH
3. Installation
Technical manual EIB/KNX
6
D I E
E N E R G I E F A M I L I E
1
2
3
4
5
6
7
8
9
10
11
12
13
1
2
3
Ins
tall
a
tio
n
3. Installation
3.1. Description
With the EIB/KNX module it is possible to connect EIB/KNX devices to the heat pump. Via the KNX module
the heat pump can communicate with other EIB/KNX devices e.g sensors and actuators. Between those
devices data like temperatures, operating modes and so on can be exchanged and processed.
3.2. Connection EIB/KNX module
The EIB/KNX module is connected via a network cable to the Navigator 2.0 touchdisplay or the network socket
on at the heat pump case.
Before connecting the EIB/KNX module the heat pump must be set currentless!
For connection version 2 an additional switch (onsite) needs to be used, if a myIDM con-
nection is wanted.
Heat Pump
Navigator 2.0
Network connection
LAN: X33
24V
Power supply
LAN
LAN
Network connection
to the router
Network
connection
KNX Module
myIDM
Version 1: Connection via router/switch and myIDM-integration
Heat Pump
Navigator 2.0
Network connection
LAN: X33
24V
Power supply
LAN
LAN
Network connection
KNX Module
Version 2: Connection without router/switch and without myIDM-integration